**【Enter Setup】
Deutsche 14
Restore Default Settings
Scan the barcode below to restore all parameters in Deutsche14 configuration to the factory default settings. To find the
related default settings, see the "Default Parameters Table" section in Chapter 7.
Enable/Disable Deutsche14
Deutsche14 is disabled by default.
【Enable Deutsche14 But Do Not Transmit Check Digit】
【Enable Deutsche14 and Transmit Check Digit】
Note: It is advised not to enable Deutsche 14 unless necessary, because Deutsche 14, ITF-14 and Interleaved 2 of 5
use the same encoding method and enabling them at the same time can easily cause confusion with each other when
decoding.
【Exit Setup】
【Restore the Default Settings of Deutsche14】
**【Disable Deutsche14】
100