Codeidsetup; Deutsche 14; Restore The Default Value - Newland NLS-HR15XX-3E User Manual

Nls-hr15 series cordless 1d barcode scanner

Table of Contents

【Start Setup】

Prohibit Reading ITF-14

Note: if the setup of ITF-14confilits with the setup of Interleaved2 of 5, for example, reading ITF-14 is allowed, but

reading Interleaved2 of 5 is not; according to the priority principle of ITF-14, the Interleaved2 of 5 with the

barcode length of 14 characters and the last character as the check character can be read, but other Interleaved2

of 5 barcodes can not be read. If the ITF-14 confilits with Deutsch14 the ITF-14 will have priority to read.

CodeIDSetup

To activate the setup function by reading ―CodeID setup‖, then read the hexadcimal value inaccordance with the character

which will be set to the CodeID.

Example: Set the CodeID ofITF-14to ―p‖ (the hexadcimal value is 0x70).

1. Read the ―Start Setup‖ barcode.

2. Read the ―CodeID Setup‖ barcode.

3. Read the numeric barcode ―7‖, ―0‖ (see the appendix—numeric barcode)

4. Read the ―Save‖ barcode.(see the appendix—numeric barcode)

5. Read the ―Exit Setup‖ barcode.

By reading the barcode, the parameter setup of Deutsche14 will be restored to the factory default state.

【Exit Setup】

CodeID Setup

Restore the Default Setup Value of Deutsche14

Allow to Read ITF-14 and Transmit the Check Digit

Table of Contents