Nortel 8300 Reference Manual page 92

92 Chapter 4 SMP log error messages
Message gtcmSetTcEntryFlowAggrCounters FAIL TcId <value>
Severity ERROR
Description This message indicates that clear statistics/counters failed for the filter.
Synopsis N/A
Action Try to enable/disable statistics on the filter.
Message gtcmSetTcLengthType: Failed, status = <value>
Severity ERROR
Description This message identifies a driver programming error. Specifically, an attempt to set
the length type for stats purpose failed.
Synopsis N/A
Action Contact the customer support team if the problem persists.
Message gtN8300TapiCleanRemDevsmcGroup failed
Severity ERROR
Description This message indicates that a cleanup of multicast information during a hot
removal failed.
Synopsis N/A
Action N/A
Message gtN8300TapiCleanRemDevsmirror failed
Severity ERROR
Description This message indicates that a cleanup of mirroring info during a hot removal
failed.
Synopsis N/A
Action N/A
Message gtN8300TapiCleanRemDevsTrunk failed
Severity ERROR
Description This message indicates that a cleanup of trunk info during a hot removal failed.
Synopsis N/A
Action N/A
316806-C