Nortel 8300 Reference Manual page 83

Message Failed to create semaphore for rcTacacsServerTblSet
Severity ERROR
Description Cannot create a semaphore for sending configuration messages to TACACS+
task. System resources might be low.
Synopsis If this error proceeds, need to restart the switch.
Action N/A
Message Failed to create STG for IMC VLAN
Severity ERROR
Description This message is generated when creating an STG for IMC fails during the system
initialization pre-configuration process.
Synopsis Cannot create STG.
Action Contact customer support for further troubleshooting.
Message Failed to find a unused IP address
Severity ERROR
Description This message is generated when an attempt to obtain an unused IP address fails.
Synopsis Search failed.
Action Contact customer support for further troubleshooting.
Message FAILED To Initialize Xbar on slot <value>
Severity ERROR
Description This message indicates that crossbar initialization was unsuccessful.
Synopsis N/A
Action Re-insert or replace the card.
Message Failed to open TACACS+ protocol pipe
Severity ERROR
Description TACACS+ client application is down. Cannot send messages to TACACS+ task.
Synopsis Restart the switch in order to restart TACACS+ Client application.
Action N/A
Chapter 4 SMP log error messages 83
System Messaging Platform Reference Guide