Nortel 8300 Reference Manual page 140

140 Chapter 4 SMP log error messages
Message portGetThrillRideSpeed: Non ThrilRide Card Type Slot <value>
Severity INFO
Description This message indicates that a non-8300 card is inserted in the specified slot.
Synopsis N/A
Action N/A
Message portPollThrillRide: port=<value>, link is unstable!
Severity WARNING
Description This message indicates that an unstable link has been detected.
Synopsis N/A
Action N/A
Message portSendCounterInfoToCP: trMsgAlloc failed
Severity FATAL
Description This message indicates that memory cannot be allocated.
Synopsis N/A
Action Reboot the switch and contact the customer support team if the problem persists.
Message portSendLinkInfoToCP: trMsgAlloc failed
Severity FATAL
Description This message indicates that memory cannot be allocated.
Synopsis N/A
Action Reboot the switch and contact the customer support team if the problem persists.
Message portVctCableStatus: normals=<value>,fails=<value>, shorts=<value>,
opens=<value>, not <value> pairs
Severity ERROR
Description This message indicates that the number of cable statuses exceeds the number of
cable pairs.
Synopsis N/A
Action N/A
316806-C