Message Format - Nortel 8300 Reference Manual

18 Chapter 1 System Messaging Platform

Message format

The SMP message format is as follows:
<Module ID><Task><NP info><CPU slot><Time stamp><Category><Severity>
Example
VLAN Task=tTrapd No-interface CPU5 [9/14/03 15:46:26] VLAN WARNING Link Down
Table 2
Table 4 on page 19
Table 2
SMP Categories
CPU
EAP
FILTER
HW
Table 3
CPU examples {string length 0.25}
CPU5
CPU6
316806-C
Note: The NP information, shown in italics, is encrypted before being
written into the Syslog file. The encrypted information is for debugging
purposes only and is not readable on the switch. It can be decrypted only
by a Customer support engineer. The CLI commands display the logs
without the encrypted information. It is not advisable to edit the log file.
provides a list of message categories.
lists of severity levels.
SMP categories
IGMP
IP
IPMC
MLT
SMP CPU examples
Table 3 provides CPU examples and
QOS STG
RADIUS SW
RMON VLAN
SNMP WEB
STG
SW
VLAN
WEB