Nortel 8300 Reference Manual page 69

Message cppInitFBufPool: Can't allocate memory!
Severity FATAL
Description This message is generated when the system could not allocate memory for FBUF
which is used to either transmit or to process a received packet. This means
system is not able to perform receive or transmit functions.
Synopsis N/A
Action Reboot the switch and contact the customer support team if the problem persists.
Message cppProcAuMsgBody: Port not in Vlan! Mac <mac> VlanId <id> Port <portnum>
Severity WARNING
Description This message is generated when some mismatch has occurred in terms of
receiving a packet, or when software information regarding the port/VLAN and
driver/hardware information is out of sync.
Synopsis N/A
Action N/A
Message cppProcAuMsgBody: STG Vlan for MLT not found! Mac <mac> VlanId <id> MltId
<mltid>
Severity WARNING
Description This message is generated when the MLT is not a member of the Spanning Tree
Group (STG) that the VLAN belongs to.
Synopsis N/A
Action N/A
Message cppProcAuMsgBody: STG Vlan for Port not found! Mac <mac> VlanId <id> Port
<portnum>
Severity WARNING
Description This message is generated when the port does not seem to be a member of the
STG that the VLAN is configured for.
Synopsis N/A
Action N/A
Chapter 4 SMP log error messages 69
System Messaging Platform Reference Guide