Nortel 8300 Reference Manual page 126

126 Chapter 4 SMP log error messages
Message ntpInitIo: can't open UDP socket
Severity ERROR
Description The socket() function returned a negative value.
Synopsis Try the command after some time. On persistence, contact customer support.
Action N/A
Message ntpReadServers: can't allocate serverElement
Severity ERROR
Description Memory allocation failed.
Synopsis N/A
Action N/A
Message ntps server event sync failed
Severity ERROR
Description HA-syncing NTP server configuration to secondary CPU failed.
Synopsis Try using the same releases on both the boxes. Else, contact customer support
Action N/A
Message ntpSendPkt: unable to forward UDP packet
Severity ERROR
Description The sendto() function returned a sentLength value == -1.
Synopsis N/A
Action N/A
Message ntpStart: Can't create mutex semaphore!
Severity FATAL
Description Semaphore creation failed.
Synopsis Memory problem! Try factory defaulting the box & then use it.
Action N/A
Message ntpSyncCallback: Unrecognized message type
Severity INFO
Description Unknown message type.
Synopsis N/A
Action N/A
316806-C