Nortel 8300 Reference Manual page 192

192 Chapter 4 SMP log error messages
Message Slot <value> PoE power usage exceed threshold limit
Severity INFO
Description This message is generated when the PoE card consumed more power than the
threshold set.
Synopsis N/A
Action Monitor the overall power consumption to prevent PoE power overload. If
necessary, disable PoE port power administratively.
Message Slot <value> PoE power usage returns below threshold limit
Severity ERROR
Description This message is generated when the PoE card consumes less power than the
threshold set after exceeding it.
Synopsis N/A
Action N/A
Message Slot <value>: <msg>
Severity INFO
Description This message is generated when the system receives boot time information from
a different slot.
Synopsis N/A
Action N/A
Message Slot <value> cardPN is not programmed
Severity ERROR
Description This message is generated when the card part number is missing in SEEPROM.
Synopsis N/A
Action Replace the card.
Message slot <value> has no PartNumber in SEEPROM.,
Severity WARNING
Description This message is generated when the part number is missing in SEEPROM.
Synopsis N/A
Action Replace card.
316806-C