Nortel 8300 Reference Manual page 71

Message cppPutFBuf: netFreeRxGtbuf <value> failed!!
Severity FATAL
Description This message is generated when the buffer that is being allocated by the system
is already is in use. It either means some error has occurred during the cleanup,
or indicates some other software issue has arisen.
Synopsis N/A
Action Reboot the switch and contact the customer support team if the problem persists.
Message cppPutFBuf: NULL address!
Severity FATAL
Description This message is generated when the memory allocated for FBUF has been
corrupted.
Synopsis N/A
Action Reboot the switch and contact the customer service team if the problem persists.
Message cppPutFBuf: Trying to put a free BD!
Severity ERROR
Description This message is generated when FBUF has already been freed or the FBUF
chain is corrupted.
Synopsis N/A
Action N/A
Message cppSchedule is invoked not from tMainTask
Severity FATAL
Description This message indicates that according to the software design, this function is
being incorrectly invoked. It should only be called by tMainTask.
Synopsis N/A
Action Reboot the switch and contact the customer service team if the problem persists.
Message cppStart: Can't create CP Port receive task!
Severity FATAL
Description This message is generated when a drastic situation arises and the system ceases
bringing up an operation. For example, during system start-up, it could not create
tMainTask to perform the majority of the switch functions.
Synopsis N/A
Action Reboot the switch and contact the customer support team if the problem persists.
Chapter 4 SMP log error messages 71
System Messaging Platform Reference Guide