Nortel 8300 Reference Manual page 201

Message tdpInit: Can't create MAC Range Filter!
Severity ERROR
Description This message is generated when the MAC filter for capturing TDP control packets
to the CPU is not created.
Synopsis N/A
Action N/A
Message The card in slot -- is resetting. Try the command later.
Severity WARNING
Description This message is generated when a card is in BOOTING state and there is a
command for that card.
Synopsis Card not ready to configure.
Action Try the command after the card is online.
Message The username and the password for standard users are set to default value. It is
highly recommended you change the password once the switch boots up.
Severity ERROR
Description This message is generated when a warning message indicates it is unable to
open the engboot file which store the number of SNMP engines booted.
Synopsis N/A
Action N/A
Message This vlan is also the BPDU vlan for stg <id>. Stg <id> cannot have any other vlans
at the presence of vlan <id>
Severity WARNING
Description This message is generated when the VLAN is used to send out tagged BPDUs for
an STG. If the VLAN is created for another purpose, no other VLAN can be
created here.
Synopsis N/A
Action Remove the VLAN from the other STG.
Chapter 4 SMP log error messages 201
System Messaging Platform Reference Guide