Nortel 8300 Reference Manual page 133

Message poePowerMgr: Could not start poePowerMgr task
Severity ERROR
Description This message indicates that the system was unable to execute the PoE task, so
PoE operation stopped.
Synopsis N/A
Action Reboot the switch.
Message poePowerSourceScan: re-scan power profile
Severity ERROR
Description This message indicates a PoE power supply configuration error has been
detected.
Synopsis N/A
Action Re-scan the power supply and rebuild the PoE power profile.
Message poeTask: PoE controller communication ERROR PoE is disabled
Severity ERROR
Description This message indicates that PoE controller initialization and communication
failed.
Synopsis N/A
Action Reset the PoE card using admin disable and then re-enable the card.
Message poeTask: PoE local DB init ERROR PoE is disabled
Severity ERROR
Description This message indicates that PoE local configuration database initialization failed.
Synopsis N/A
Action Reset the PoE card using admin disable and then re-enable the card.
Message poeTask: PoE module init ERROR PoE is disabled
Severity ERROR
Description This message indicates that PoE operational configuration initialization failed.
Synopsis N/A
Action Reset the PoE card using admin disable and then re-enable the card.
Chapter 4 SMP log error messages 133
System Messaging Platform Reference Guide