Nortel 8300 Reference Manual page 67

Message Could not start portMgr Task , <value>,
Severity FATAL
Description This message indicates the portMgr task could not be created.
Synopsis N/A
Action Reboot the switch and contact the customer support team if the problem persists.
Message cpp2LargeFbufInit: Can't allocate memory!
Severity FATAL
Description This message is generated when the system could not allocate memory for FBUF
which is used to either transmit or process large received packets. This means the
system will not be able to perform receive or transmit functions.
Synopsis N/A
Action Reboot the switch and contact the customer service team if the problem persists.
Message cppAddDefaultRouteHook: ifAddrSet failed!
Severity ERROR
Description This message is generated when the registration of the CP interface with vxWorks
has failed. Any communication with the vxWorks IP stack will also fail.
Synopsis N/A
Action Reboot the switch and contact the customer support team if the problem persists.
Message cppAddDefaultRouteHook: ifFlagChange failed!
Severity ERROR
Description This message is generated when registration of the CP interface with vxWorks
fails. Any communication with the vxWorks IP stack will also fail.
Synopsis N/A
Action Reboot the switch and contact the customer support team if the problem persists.
Message cppAddDefaultRouteHook: ifMaskSet failed!
Severity ERROR
Description This message is generated when registration of the CP interface with vxWorks
fails. Any communication with the vxWorks IP stack will also fail.
Synopsis N/A
Action Reboot the switch and contact the customer support team if the problem persists.
Chapter 4 SMP log error messages 67
System Messaging Platform Reference Guide