S Messages - Nortel 8300 Reference Manual

S Messages

Message Save config to file <file-name> failed.
Severity INFO
Description This message is generated when the switch is unable to save the PCAP
configuration.
Synopsis N/A
Action N/A
Message Save config to file <file-name> successful.
Severity INFO
Description This message is generated when the PCAP configuration is saved successfully in
the slave CPU.
Synopsis N/A
Action N/A
Message Secondary CPU resetting...)
Severity INFO
Description This message is generated when the standby CPU is going to reset shortly.
Synopsis N/A
Action N/A
Message Select failed
Severity WARNING
Description This message is generated when select function call fails.
Synopsis N/A
Action Contact customer service for further troubleshooting.
Message semDelete failed <value>
Severity ERROR
Description This message is generated when the semaphore deletion failed.
Synopsis N/A
Action Reboot the switch and contact the customer service team if the problem persists.
Chapter 4 SMP log error messages 189
System Messaging Platform Reference Guide