Nortel 8300 Reference Manual page 177

Ethernet routing switch system messaging platform
Hide thumbs Also See for 8300:
Table of Contents

Advertisement

Message
rcIpDhcpForwardTbIGet invalid get option
Severity
ERROR
Description
This message indicates that an invalid SNMP GET is selected.
Synopsis
SNMP GET option invalid.
Action
More troubleshooting is required.
Message
rcIpGetDhcpPortStatsRec: Bad PortNum
Severity
ERROR
Description
This message indicates that a port number is not within its specified range.
Synopsis
Port number invalid.
Action
Check the configuration for port number minimum and maximum values.
Message
rcIpGetDhcpPortStatsRec: unable to allocate a DhcpPortStatsRec for PortNum
Severity
ERROR
Description
This message indicates failure of memory allocation.
Synopsis
Cannot allocate memory dynamically.
Action
Close all CLI sessions to free the memory.
Message
rcIpGetIcmpInMsgs: m2IcmpGroupInfoGet failed
Severity
ERROR
Description
This message is generated if the ICMP group information fetching operation failed
while receiving the message.
Synopsis
ICMP group information fetching operation failed.
Action
No action required. Contact customer support for further troubleshooting.
Message
rcIpGetIcmpOutMsgs: m2IcmpGroupInfoGet failed
Severity
ERROR
Description
This message is generated if the ICMP group information fetching operation failed
while sending the message.
Synopsis
ICMP group information fetching operation failed.
Action
No action required. Contact customer support for further troubleshooting.
Chapter 4 SMP log error messages 177
System Messaging Platform Reference Guide

Advertisement

Table of Contents
loading

Table of Contents