Nortel 8300 Reference Manual page 141

Message portVctDoTest: Could not get the Result in WA. gtStatus not OK: <value>
Severity ERROR
Description This message indicates that the result could not be obtained from the VCT test.
Synopsis N/A
Action Perform the test again.
Message portVctDoTest: Could not get the Result. gtStatus not OK: <value>
Severity ERROR
Description This message indicates the result could not be obtained from the VCT test.
Synopsis N/A
Action Perform the test again.
Message portVctDoTest: Could not start the test in the WA. gtStatus not OK: <value>
Severity ERROR
Description This message indicates that the VCT test could not be performed.
Synopsis N/A
Action Perform the test again.
Message portVctDoTest: Could not start the test. gtStatus no OK: <value>
Severity ERROR
Description This message indicates the VCT test could not be performed.
Synopsis N/A
Action Perform the test again.
Message portVctDoTest: Could not write 0x2 into Reg30)
Severity ERROR
Description This message indicates that the information could not be written into the register
for the VCT test.
Synopsis N/A
Action Perform the test again.
Chapter 4 SMP log error messages 141
System Messaging Platform Reference Guide