Nortel 8300 Reference Manual page 181

Ethernet routing switch system messaging platform
Hide thumbs Also See for 8300:
Table of Contents

Advertisement

Message
rcIpModifyNextHop: trying to replace local route for route: <ipaddr> mask:
<mask>
Severity
ERROR
Description
Never try to replace the local route, but here it indicates it is doing so. You should
only delete and add local route.
Synopsis
N/A
Action
N/A
Message
rcIpNextHopExists: arpaddUnres returns NULL
Severity
FATAL
Description
This message is generated when an attempt to locate an ARP entry in the
unresolved table fails.
Synopsis
Search failed.
Action
Contact customer service and have the following information available for further
analysis: system logs including any memory dumps, switch configuration, and
network topology.
Message
rcIpProcessFrame: pP2IpBd!= NULL after call to iprx
Severity
ERROR
Description
This message is generated if the pointer to buffer for sending the IP packet is not
freed after a call to the IP receiver.
Synopsis
Buffer not released.
Action
Contact customer service for further troubleshooting.
Message
rcIpRemovePortFromVlan: Bad Port Number <value>
Severity
ERROR
Description
This message is generated if the port number is out of range of valid values.
Synopsis
Invalid port number.
Action
Provide a correct and valid port number.
Message
rcipRouteIndexAdd() - failed adding <ipaddr>, Mask= <mask>
Severity
WARNING
Description
This message is generated when adding a new route index failed.
Synopsis
Addition of route index failed.
Action
N/A
Chapter 4 SMP log error messages 181
System Messaging Platform Reference Guide

Advertisement

Table of Contents
loading

Table of Contents