Nortel 8300 Reference Manual page 134

134 Chapter 4 SMP log error messages
Message poeTask: PoE power (48V ERROR PoE is disabled
Severity ERROR
Description This message identifies a PoE power 48V error.
Synopsis N/A
Action Replace PoE card, PoE power supply, or PoE chassis.
Message poeTask: PoE task ERROR PoE is disabled
Severity ERROR
Description This message specifies that the system was unable to execute the PoE task, so
PoE operation stopped.
Synopsis N/A
Action Reset the PoE card using admin disable and then re-enable the card.
Message poeTask: PSE power error detected, PoE is disabled
Severity ERROR
Description This message identifies a PoE power 48V error.
Synopsis N/A
Action Reset the PoE card using admin disable and then re-enable the card.
Message Policy Prefix table not init
Severity ERROR
Description This message indicates the policy prefix table has not been initialized.
Synopsis N/A
Action N/A
Message Port -- aborting
Severity INFO
Description This message indicates that an 802.1X controlled port entered the aborting state
of the Authenticator PAE State machine.
Synopsis Port entered the aborting state of the Authenticator PAE State machine.
Action No action is necessary.
316806-C