Nortel 8300 Reference Manual page 168

168 Chapter 4 SMP log error messages
Message radSendServer can't lock mutex
Severity ERROR
Description This message indicates that the switch is unable to acquire a software resource.
Synopsis Software error.
Action Contact customer support.
Message radSnmpAcctNwData_Add Can't allocate memory for SNMP Session
Severity ERROR
Description This message indicates that the system is out of memory.
Synopsis Insufficient memory.
Action If the problem persists, contact customer support.
Message rcBridgePP8300FilterTblSet: indexAdd failed!
Severity ERROR
Description This message indicates that adding a MAC filter failed.
Synopsis N/A
Action N/A
Message rcBridgePP8300FilterTblSet: malloc failed!
Severity ERROR
Description This message indicates that memory allocation failed.
Synopsis System might be out of memory.
Action N/A
Message rcBridgeStaticMulticastTblSet:can't take semaphore!
Severity ERROR
Description This message indicates that the semaphore will not add a multicast MAC entry.
Synopsis N/A
Action N/A
316806-C