Nortel 8300 Reference Manual page 142

142 Chapter 4 SMP log error messages
Message portVctDoTest: Could not write 0xa into Reg29)
Severity ERROR
Description This message indicates that the information could not be written into the register
for the VCT test.
Synopsis N/A
Action Perform the test again.
Message portVctDoTest: Could not write back 0x0 into Reg30)
Severity ERROR
Description This message indicates that the information could not be written into the register
for the VCT test.
Synopsis N/A
Action Perform the test again.
Message portVctDoTest: Could not write back 0xa into Reg29)
Severity ERROR
Description This message indicates that the information could not be written into the register
for the VCT test.
Synopsis N/A
Action Perform the test again.
Message portVctDoTest: invalid portnum <port>
Severity ERROR
Description This message indicates that the specified port number is not correct.
Synopsis N/A
Action Check the port number and perform the test again.
Message portVctDoTest: port <portnum> over high water mark
Severity ERROR
Description This message indicates that the specified port number is not correct.
Synopsis N/A
Action Check the port number and perform the test again.
316806-C