Nortel 8300 Reference Manual page 61

Message Cannot unbind vlanId <value> from stg <value>, err=<value>!
Severity ERROR
Description This message indicates the unbinding of STG from the BPDU VLAN failed in
hardware during STG deletion.
Synopsis N/A
Action Reboot the switch and contact the customer support team if the problem persists.
Message cannot update nexthop tbl entry
Severity ERROR
Description This message is generated when the system is trying to update the software
next-hop entry, but finds the pointer to the next hop entry is NULL.
Synopsis N/A
Action Contact the customer service team if the problem persists.
Message Cannot update nexthop tbl entry
Severity ERROR
Description When trying to update the software next-hop entry, it was discovered that the
pointer to the next hop entry is NULL.
Synopsis N/A
Action Contact the customer support team if the problem persists.
Message Card configured OffLine: Slot=<value> Type=<value
Severity FATAL
Description This message indicates the card was configured off-line.
Synopsis N/A
Action N/A
Message Card Failed: Slot=<value> Type=<value>,
Severity ERROR
Description This message specifies the card failed.
Synopsis N/A
Action Re-insert or replace the card.
Chapter 4 SMP log error messages 61
System Messaging Platform Reference Guide