C Messages - Nortel 8300 Reference Manual

56 Chapter 4 SMP log error messages
Message bootpSyncCallback: Invalid msgType <type>
Severity ERROR
Description This message specifies that an invalid argument exists for the bootp module sync
callback function.
Synopsis N/A
Action N/A
Message bootpSyncCallback: unsupported version <ver>
Severity ERROR
Description There is a synchronization issue between two CPUs, perhaps a bootp module
version mismatch
Synopsis N/A
Action N/A
Message bootpSyncNotify: malloc failed
Severity FATAL
Description This message indicates the system has run out of memory
Synopsis N/A
Action Reboot the switch and contact the customer support team if the problem persists.

C Messages

Message Cannot add an ARP entry to a non-existing port
Severity INFO
Description This message is generated when a port is not found to add an entry to the ARP
table.
Synopsis Cannot add a new entry in the ARP table.
Action Check the configuration for the port.
316806-C