Nortel 8300 Reference Manual page 199

Message TACACSP_tcp_create_con: can't get socket
Severity ERROR
Description Cannot create socket for authenticating with TACACS+.
Synopsis If the problem persists, must restart switch.
Action N/A
Message TACACSP_tcp_create_con: failed to set ioctl FIONBIO
Severity ERROR
Description Cannot configure socket for authenticating with TACACS+
Synopsis If the problem persists, must restart switch.
Action N/A
Message TACACSP_tcp_create_con: failed to set setsockopt SO_REUSEADDR
Severity ERROR
Description Cannot configure socket for authenticating with TACACS+
Synopsis If the problem persists, must restart switch.
Action N/A
Message tacacsStart: failed to init TACACS
Severity ERROR
Description Cannot launch TACACS+ application
Synopsis Serious problem. TACACS+ will never be operable.
Action N/A
Message tapiBindPortToDropProfile: Failed, status = <value>
Severity ERROR
Description This message is generated when there is a driver programming error. Specifically,
an attempt to bind drop the profile to a port failed.
Synopsis N/A
Action Contact the customer service team if the problem persists.
Chapter 4 SMP log error messages 199
System Messaging Platform Reference Guide