Set Text Orientn; Host Override; Lac Approx - Printronix P7000 User Manual

LAC Approx.

A process that reorganizes columns of dots so that clean, readable
printing is possible.
•
On (default). Converts the emulated character cells to standard
cells for the P7224 model.
•
Off. Converts character cells byte by byte and not by LAC
approximation.

Set Text Orientn

Specifies the direction in which characters are printed on the page.
This allows the printer to print languages that are printed right to left
instead of left to right. The options include:
•
Control By Host (default)
•
Left to Right
•
Right to Left

Host Override

Determines whether the printer accepts certain commands sent by
the host or continues to use the current operator panel settings.
•
Disable (default). Allows the following host commands to
override operator panel settings: line length, forms length, lines
per inch (LPI), characters per inch (CPI), print quality, and text
orientation. Note the information appearing on the message
display may not match the data stream setting. No values will
change upon initial selection of the disable option.
•
Enable. The operator panel settings override the host
commands.
NOTE: Host margin and tab settings will take precedence whether
or not Host Override is enabled.
Twinax Params
185