Printronix P7000 User Manual page 44

Chapter 3
Operational Procedures
Platen Stop
Platen Lever
Figure 15. Adjusting the Platen Lever
29. Turn the Auto Platen Stop Knob clockwise or counterclockwise
NOTE: The platen stop allows you to set an optimum and
30. Lower the platen lever until it stops.
31. Press ON LINE/CLEAR to clear any fault messages (such as
32. Press SET TOF. The top-of-form you have set moves down to
33. Press ON LINE/CLEAR and close the printer cover.
44
Vertical Position
Knob
A
to match the paper thickness. (The A-B-C scale corresponds
approximately to 1-, 3-, and 6-part paper thickness. Adjust until
you have the desired print quality).
consistent thickness that is not affected when opening and
closing the platen lever.
"LOAD PAPER") from the LCD.
the print position. If there is data in the buffer, the paper moves
forward to the last print position on the next page.
Paper Thickness
Indicator
A
Platen Stop
Knob