Printronix P7000 User Manual page 72

Chapter 4
Main Menu
Brief descriptions follow for the first-level configuration menu
options:
•
•
•
•
•
•
•
•
•
72
QUICK SETUP — These options allow quick access to the
most frequently changed or inputted parameters during the
installation of the printer.
CONFIG. CONTROL — These options allow you to save, print,
load, delete, name, and reset entire sets of configuration
parameters.
HOST INTERFACE — These options allow you to select either
the Serial RS-232, Serial RS-422, Centronics
®
Dataproducts parallel and Long Lines, Ethernet
1284 parallel, Auto Switching, Coax or Twinax interface for the
printer. This menu also allows you to configure several
parameters for each interface.
NETWORK SETUP — This option allows you to select from
Ethernet Address options and Ethernet Parameters options.
ACTIVE (IGP) EMUL — This menu allows you to select the
PGL or VGL emulation from the menu if IGP is installed.
EMULATION — This menu allows you to configure the options
which are available for the current operating (active) emulation.
For example, if LinePrinter+ is the active emulation, then the
LinePrinter+ emulation options can be configured using this
menu.
PRINTER CONTROL — These options allow you to select
parameters common to a general user, such as display
language and Barcode quality.
ADVANCED USER — These options allow you to select
several advanced operating parameters for the printer, such as
the speed at which paper will advance when slewing.
DIAGNOSTICS — These options include the diagnostic tests,
system memory, and statistics of the printer.
®
parallel,
™ ®
, IEEE