Printronix P7000 User Manual page 158

Chapter 4
IGP/VGL Emulation
MSI Check Digit
•
Print (default). The check digit is appended at the end of the
printable data field for MSI barcodes.
•
Don't Print. The check digit for MSI barcodes does not print.
I25 Selection
•
I25 Odd Data (default). When an odd number of data is
provided, the default setting, Leading Zero, will add a zero to
the beginning of the bar code data. The setting, Check Digit,
will add a check digit to the end of the bar code data so that the
results add up to an even number of data.
•
Convert Alpha. Disable is the default. When enabled, each
non-digit I25 bar code character will convert to "0."
NOTE: If you use an Interleaved 2/5 barcode that automatically
AI 00 Spaces
This option is designated for EAN/UCC-128 barcodes whose
application identifier (AI) is 00.
•
Disable (default). The printable data field is printed with the AI
enclosed in parentheses. This is the standard EAN/UCC-128
format.
•
Enable. The printable data field is printed with the UCC fields
separated by spaces. This option is IGP-X00 compatible.
158
adds the check digit (type code k or l, IBARC type code
INT2/5CD or INT2/5CDA), the check digit is added
regardless of how this parameter is set.