Character Set; Sfcc D Command - Printronix P7000 User Manual

Chapter 4
LinePrinter Plus Emulation (with PCL-II)

Character Set

Specifies a character set as shown in the "P-Series Character Set
Menu" on page 225. To use one of these sets, choose the desired
group heading (such as European Sets) and press ENTER. Then
choose the desired set within that group (such as Roman 8) and
press ENTER. Both the group and the desired set will be starred to
indicate your selection. Character sets are shown in detail in the
Character Sets Reference Manual .

SFCC d Command

•
•
PSeries Dbl High
Allows printing compatibility between current and older model
printers.
•
•
FF Valid at TOF
•
•
224
Even dot plot (default). This option interprets SFCC d
Command as even dot plot.
Double High. This option interprets SFCC d Command as
double high. Select this option for backward compatibility.
Normal (default). This is normal, double-high printing for
current model printers.
P3/4/6/9 Compat. Where older printers print two dot rows
higher, this option allows for compatibility by raising the print
two dot rows to match the current models dot row value (two
dot rows lower).
Enable (default). Performs a form feed when the host sends a
Form Feed command and the printer is at the top of form.
Disable. Will not perform a form feed when the host sends a
Form Feed command and the printer is at the top of form.