Epson Fx Emulation - Printronix P7000 User Manual

Epson FX Emulation

Printer
Protocol
(from page 209)
Epson FX
Define CR Auto LF
Code
CR = CR* Enable*
CR = CR + LF
Disable
Alt. Set
80-9F
Control Code*
Printable
Define CR Code
The Define CR Code option controls the action of the printer when it
receives a Carriage Return code (hex 0D) from the host computer.
If this feature is enabled, each time the printer receives a carriage
return, it inserts an additional Line Feed code (hex 0A) into the data
stream. Do not use this feature if the host computer sends line
feeds to the printer.
•
CR = CR (default). Does not insert an extra line feed after each
carriage return.
•
CR = CR + LF. Inserts an extra line feed after each carriage
return.
Define LF Printer
Code Select
LF = LF* Disable*
LF = CR + LF Enable
Epson FX Emulation
* = Factory Default
Character 20 CPI
Set Condensed
(see page 244) Enable*
Disable
241