Changing Parameters Example - Printronix P7000 User Manual

Changing Parameters Example

OFFLINE
QUICK
. . .
SETUP CONTROL
Ribbon End
Darker +6
Darker +5
Darker +4
Darker +3
Darker +2
Darker +1
Normal*
Lighter -1
Lighter -2
Lighter -3
Lighter -4
Lighter -5
Lighter -6
Lighter -7
Lighter -8
Lighter -9
Lighter -10
A configuration consists of several parameters. The default factory
configuration has a starting set of parameters. In the configuration
menu above, and in all the configuration menus in this chapter, the
factory default values are indicated by an asterisk (*).
Your print jobs may require parameter values which vary from the
default settings. This section provides an example procedure for
changing individual parameter values.
The following procedure shows how to change and save the
settings for the Barcode Quality and Language options. Use these
guidelines to navigate the configuration menus and change other
parameters.
PRINTER
Open Platen
Point @ BOF
Disable*
Enable
Unidirectional
Disable*
Enable
Changing Parameters Example
* = Factory Default
Barcode Tear Bar
Quality Dist.
Dark* 7.46 in.*
Draft (4.5-10.5 in.)
Display Accented
Language Char
English Standard*
German Tall
French
Italian
Spanish
Portuguese
57