Aerodr Interface Unit2 - Konica Minolta AeroDR System Operation Manual

2.2 Component names and functions

2 .2 .4 AeroDR Interface Unit2

The component names and functions of the AeroDR Interface Unit2 are as follows.
(1) Exhaust outlet
(7) Spacer
Number
(1) Exhaust outlet
(2) Top cover
(3) Detector Connection LEDs
(4) Power switch
(5) Rear cover
(6) Side cover
(7) Spacer
(8) Front cover
(9) Generator Interface LEDs
(10) Cable outlet
(11) Hand switch
(3) Detector
(2) Top cover
Connection
LEDs
(4) Power
(9) Generator
(6) Side cover
Interface LEDs
(8) Front cover
Name
Exhausts internal heat.
Protects the internal parts.
Displays the status of the AeroDR Interface Unit2.
• For the display patterns and status of the LEDs, refer to "Chapter 4 Status
Turns the AeroDR Interface Unit2 on/off.
Protects the internal parts.
Protects the internal parts.
• Prevents exhaust outlet from being blocked after installation.
• No spacers may be provided on some side covers that will not come in contact
with walls.
Protects the internal parts.
Displays the status of the AeroDR Interface Unit2.
• For the display patterns and status of the LEDs, refer to "Chapter 4 Status
Outlet for various cables.
When S-SRM connection is adopted, a hand switch is installed in the AeroDR
Interface Unit2.
(11) Hand switch
(5) Rear cover
(6) Side cover
switch
(10) Cable outlet
Reference
(LED) Display".
Reference
(LED) Display".
38
(1) Exhaust outlet
(7) Spacer
Functions