Detector - Konica Minolta AeroDR System Operation Manual

8 .1 Wireless performance of AeroDR Detector
Functionality item
Mode Setting Communication mode
Communication method
Inter-ST communication (Adhoc)
Roaming
QoS
Authentication SSID
Authentication method
Encryption Encryption mode
WPA-PSK
Scanning function Scanning execution
Scanning targeted channel setting
Scanning channel dwelling time
Scanning result acquisition
Operating parameters Number of retry operation (Hardware) The number of 2 to 13 operations should be settable.
Transmitting power control
Rate control Support rate
Power saving function Operation mode
Requirement Specifications
The following settings should be enabled.
Infrastructure / Adhoc
Enable/Disable setting in each communication method of
IEEE802.11a/b/g/n should be controlled.
Should be provided with standard-compliant
Enable/Disable controllable functions
Should be provided with standard-compliant
Enable/Disable controllable functions
Should be provided with standard-compliant
Enable/Disable controllable functions
1 to 32 characters should be settable.
The following settings should be enabled.
open / shared
The following settings should be enabled.
none / WPA2-PSK
Encryption mode AES
Passphrase 8 to 63 characters should be settable.
Should be provided with scanning function based on the
following settings
active / passive
Scanning targeted channel should be settable.
Dwelling time for each scanning-executed channel
should be settable.
General information defined in 802.11 including RSSI
value should be acquirable.
Output-enable range in hardware should be settable.
Should support all rates defined in IEEE802.11a/b/g/n
and be able to execute Enable/Disable setting for each
rate.
Power saving-related parameters should be controllable.
110