Konica Minolta AeroDR System Operation Manual page 93

1
Remove the label from the AeroDR Grip
sheet affixing position.
• Insert a precision flat-blade screwdriver, etc. into the
step at the AeroDR Grip sheet affixing position to slight-
ly turn the label over, and then remove it completely.
Label on the AeroDR Grip
sheet affixing position
IMPORTANT •••••••••••••••••••••••••••••••••••••
• Be careful not to scratch the AeroDR Detector.
• Be sure to peel off the label or used AeroDR Grip
sheet because it may come off.
•• • •• •• •• • •• •••••••••••••••••••••••••••••••••• •••••••
2
Remove dust and contamination from the
AeroDR Grip sheet affixing position.
AeroDR Grip sheet affixing position
HINT •••••••••••••••••••••••••••••••••••••
• After removing the label or used AeroDR Grip
sheet, clean off any adhesive residue on the sur-
face using a soft cloth moistened with anhydrous
ethanol.
•• •• •• • •• •• • •••••••••••••••••••••••••••••••••••••••••
6.1 Maintenance and inspection items
3
Peel off the center piece of the release
paper from the AeroDR Grip sheet, and
temporarily affix the sheet to the required
position on the AeroDR Detector .
Release paper
AeroDR Grip sheet
• ••• •• •• •• ••• •• •• •• •• ••• •• •• •• ••• • • • •
IMPORTANT
• Place the AeroDR Grip sheet in the correct position
so that it does not overlap the AeroDR Detector la-
bel.
•• •• •• •• ••• •• •• •• ••• •• •• •• ••• •• •• •• ••• •• •• •• ••• •• • • • •
4
Peel off the left and right pieces of the
release paper from the AeroDR Grip sheet
and affix the sheet to the required position
on the AeroDR Detector .
AeroDR Grip sheet
IMPORTANT • ••• •• •• •• ••• •• •• •• •• ••• •• •• •• ••• • • • •
• Affix the sheet slowly from the center to the right
and left sides to attach it tightly to the AeroDR De-
tector.
• Confirm that the AeroDR Grip sheet has been se-
curely placed.
•• •• •• •• ••• •• •• •• ••• •• •• •• ••• •• •• •• ••• •• •• •• ••• •• • • • •
5
Repeat the same steps to affix the other
three sheets .
93
AeroDR Grip sheet
affixing position
AeroDR Grip sheet
affixing position