Konica Minolta AeroDR System Operation Manual page 41

2 .2 .7 AeroDR Battery Charger
The component names and functions of the AeroDR Battery Charger are as follows.
(4) Side cover
(7) AeroDR Detector
insert table (side)
Number Name
(1) Rear cover
(2) Slide cover
(3) Top cover
(4) Side cover
(5) Charge/registration label
(6) AeroDR Detector insert table (front)
(7) AeroDR Detector insert table (side)
(8) LEDs
(9) Front cover
(10) Roller
(2) Slide cover
(1) Rear cover
(9) Front cover
(8) LEDs
Protects the internal parts.
Protects the internal parts, and prevents dust from getting inside the AeroDR
Battery Charger.
Protects the internal parts.
Protects the internal parts.
When an AeroDR Battery Charger exclusively for charge is used, a label that
distinguishes the AeroDR Battery Charger exclusively for charge from an
AeroDR Battery Charger that is used for charge and registration is affixed.
Guide for inserting the AeroDR Detector from the front.
Guide for inserting the AeroDR Detector from the side.
Indicates the status between the AeroDR Detector and the AeroDR Battery
Charger.
Reference
• For the display patterns and status of the LEDs, refer to "Chapter 4 Status
(LED) Display".
Protects the internal parts.
Prevents external friction when you insert the AeroDR Detector.
41
2.2 Component names and functions
(3) Top cover
(4) Side cover
(5) Charge/
registration label
(6) AeroDR Detector
insert table (front)
(10) Roller
Functions