Konica Minolta AeroDR System Operation Manual page 43

2 .2 .9 AeroDR Access Point
The component names and functions of the AeroDR Access Point are as follows.
(1) LEDs
Cannot be used with this
device
(2) 10/100BASE-T(X)
RJ45 port
Number Name
(1) LEDs
(2) 10/100BASE-T(X) RJ45 port
(3) Antenna port
(4) Antenna
2.2 Component names and functions
(3) Antenna port
(4) Antenna
Displays the status of the AeroDR Access Point.
Reference
• For the display patterns and status of the LEDs, refer to "Chapter 4 Status
(LED) Display".
Used for connection to the AeroDR Interface Unit or AeroDR Interface Unit2.
Port to attach antenna.
Receives wireless signal.
43
Functions