Konica Minolta AeroDR System Operation Manual page 26

1.3 Safety precautions
– If you directly apply or spray disinfecting solution
on the AeroDR Detector, the solution will enter
the instrument through exterior gaps, causing a
failure. Dampen a lint-free, soft cloth with disin-
fecting solution, and use after wringing it thor-
oughly. Do not apply disinfecting solution onto
the wired connection connector and LED when
cleaning.
– Disinfecting solution is a chemical agent, so fol-
low the precautions of the manufacturer.
• Fully charge battery once a month even if the
AeroDR Detector has not been used for a long
time.
CAUTION
1 .3 .7 Precautions on service
life
Service life
Name
AeroDR Detector
AeroDR Interface Unit
AeroDR Interface Unit2
AeroDR Generator
Interface Unit
AeroDR Generator
Interface Unit2
AeroDR Battery Charger
AeroDR Battery Charger2
AeroDR Access Point
AeroDR I/F Cable
AeroDR I/F Cable2
AeroDR UF Cable
• The above service life is valid only if the product
has been properly operated while following the
precautions for use and performing the specified
maintenance. (By self certification <our data>)
• The service life may differ depending on usage
conditions and environment.
• Some component parts of this device are com-
mercially available parts that have a short cycle
of model changes, therefore, it might not be
possible to supply service parts even within the
service life. In addition, related component parts
may need to be replaced to maintain compatibil-
ity at the time of model change.
26
CAUTION
Service life
6 years
6 years
6 years
6 years
6 years
6 years
6 years
6 years
6 years
6 years
6 years