Konica Minolta AeroDR System Operation Manual page 64

3 .4 Registration and selection of the AeroDR Detector
By registering the AeroDR Detector in the image pro-
cessing controller using one of the following methods,
the AeroDR Detector can be moved between exposure
rooms.
• Insert it into the AeroDR Battery Charger or AeroDR
Battery Charger2
• Connect the AeroDR I/F Cable or AeroDR UF Cable
to the wired connection connector
IMPORTANT •••••••••••••••••••••••••••••••••••••
• When using ImagePilot as the image processing con-
troller, it is not possible to move the AeroDR Detector
between different exposure rooms.
• Once it is registered in a new exposure room, it will
not be usable in the previous exposure room. When
returning to a previous exposure room, perform the
registration operation again.
• • •• • • •• • • •• •••••••••••••••••••••••••••••••••• •••••••
3 .4 .1 Registration with AeroDR
Battery Charger
To register the AeroDR Detector in the AeroDR Battery
Charger, follow the procedure below.
IMPORTANT •••••••••••••••••••••••••••••••••••••
• AeroDR 1012HQ cannot be registered with the AeroDR
Battery Charger.
• • •• • • •• • • •• •••••••••••••••••••••••••••••••••• •••••••
1
Make sure that all the devices in the destina-
tion exposure room are usable .
2
Insert the AeroDR Detector into AeroDR Bat-
tery Charger in the destination exposure room .
• Registration process will start.
Exposure
side
3
Once the registration is completed, a
buzzer will sound on the AeroDR Battery
Charger, and the LED (green) will change
from slow flashing to lit.
LED (green)
4
Confirm that the AeroDR Detector icon is
displayed on the image processing con-
troller .
IMPORTANT •••••••••••••••••••••••••••••••••• • ••
• When an AeroDR Battery Charger exclusively for
charge is used, confirm that the battery charger in the
destination has a "Charge and registration" label.
•••••••••••••••••••••••••••••••••••••••••••••••••• •• •
HINT •••••••••••••••••••••••••••••••••• • ••
• Charging will also start when the AeroDR Detector
(AeroDR 1417HQ, AeroDR 1417S, AeroDR 1717HQ,
AeroDR 2 1417HQ) is inserted into the AeroDR Bat-
tery Charger, and the AeroDR Battery Charger LED
(blue) will light.
•••••••••••••••••••••••••••••••••••••••••••••••••• • ••
64