Startup Sequence Of This Device - Konica Minolta AeroDR System Operation Manual

3 .1 Startup and shutdown
Normally, this device is used with the power on.
When not used for more than 1 day, operate the start-
up/shutdown as follows.
Reference •••••••••••••••••••••••••••••••••••••
• Refer to the "Operation Manual" of the image processing
controller regarding on/off for the image processing controller.
• • •• • • •• • • •• •••••••••••••••••••••••••••••••••• •••••••
3 .1 .1 Startup sequence of this
device
The startup sequence of this device is as follows.
AeroDR SYSTEM
 When using AeroDR Interface Unit
1
AeroDR Interface Unit
2 Image processing controller
3 AeroDR Detector
AeroDR Battery Charger/
4
AeroDR Battery Charger2
Confirm that the AeroDR Detector is ready for
use on the image processing controller.
 When using AeroDR Interface Unit2
1 AeroDR Interface Unit2
2 Image processing controller
3
AeroDR Detector
AeroDR Battery Charger/
4
AeroDR Battery Charger2
Confirm that the AeroDR Detector is ready for
use on the image processing controller.
AeroDR Generator
Interface Unit
AeroDR Access Point
AeroDR Access Point
AeroDR SYSTEM 2
HINT •••••••••••••••••••••••••••••••••• • ••
• In the AeroDR SYSTEM 2, the combination of the
AeroDR Interface Unit2 and AeroDR Generator Inter-
face Unit2 is not assumed.
• In the AeroDR SYSTEM 2, configurations that do not
use the AeroDR Interface Unit are also possible.
•••••••••••••••••••••••••••••••••••••••••••••••••• • ••
 When using AeroDR Interface Unit
(Power is supplied from the AeroDR Inter-
face Unit to the AeroDR Generator Interface
Unit2 and access point .)
1 AeroDR Interface Unit
2
Image processing controller
3 AeroDR Detector
AeroDR Battery Charger/
4
AeroDR Battery Charger2
Confirm that the AeroDR Detector is ready for
use on the image processing controller.
 When the AeroDR Interface Unit is not used
(Power is supplied from the AC adapter to
the AeroDR Generator Interface Unit2 and
access point .)
1 AeroDR Generator Interface Unit2
2 Access point
3
Image processing controller
4 AeroDR Detector
AeroDR Battery Charger/
5
AeroDR Battery Charger2
Confirm that the AeroDR Detector is ready for
use on the image processing controller.
46
AeroDR Generator
Interface Unit2
Access point