Konica Minolta AeroDR System Operation Manual page 12

1 .1 Symbols relating to safety
1 .1 .1 Safety alert symbol
This is a "safety alert symbol". This symbol alerts you
to matters and/or operation potentially hazardous to
yourself and other people. Read these messages and
follow the instructions carefully.
1 .1 .2 Warning notice (signal
words)
Signal words indicate the degree of potential hazards
in the use of the product.
Signal words include the following three types, which
are used according to risk of damage caused by dan-
ger and the severity of damage.
DANGER
Indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation which, if
not avoided, could result in minor or moderate injury.
It may also be used to indicate hazardous situation
where only physical damage is likely to occur.
1 .1 .3 Description of graphic
symbols
Indicates the on or standby position for
the power switch of this device.
Indicates the off position for the main
power switch of this device.
Indicates the on position for the main
power switch of this device.
Indicates the position where the ground
is attached.
Indicates a B-type Applied Parts medical
device.
Indicates that full caution is required
when handling this device.
Indicates that it is necessary to read the
User's Manual before use or operation of
this device.
Indicates devices including radio fre-
quency transmitters.
Indicates that the level of water ingress
protection is equivalent to IPX6.
This CE mark on this product indicates
that this product is in conformity with the
applicable requirements set out in the
Directive 93/42/EEC (Medical Device
Directive) and in Directive 2011/65/EU
(RoHS Directive).
0197 indicates the identification number
0197
of the notified body responsible only for
implementation of the Directive 93/42/
EEC (Medical Device Directive).
EC Directive 93/42/EEC does not cover
animal use. So, the notified body whose
identification number is 0197 is not re-
sponsible for animal use.
It means conformity with the Radio
Equipment and Telecommunications
Terminal Equipment Directive 1999/5/
EC. And the alert sign (!) means that is
categorized Class 2 radio equipment.
12