Configuring Broadcast Packet Handling
Flooding IP Broadcasts
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Routing Configuration Guide, Cisco IOS XE Everest 16.6.x (Catalyst 9500 Switches)
76
Command or Action
enable
Example:
Device> enable
configure terminal
Example:
Device# configure terminal
ip forward-protocol spanning-tree
Example:
Device(config)# ip forward-protocol
spanning-tree
end
Example:
Device(config)# end
show running-config
Example:
Device# show running-config
copy running-config startup-config
Example:
Device# copy running-config
startup-config
configure terminal
Example:
Device# configure terminal
Configuring IP Unicast Routing
Purpose
Enables privileged EXEC mode. Enter your
password if prompted.
Enters the global configuration mode.
Uses the bridging spanning-tree database
to flood UDP datagrams.
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the
configuration file.
Enters the global configuration mode.
Need help?
Do you have a question about the Catalyst 9500 series and is the answer not in the manual?