Configuring Bgp Filtering By Neighbor - Cisco Catalyst 9500 series Configuration Manual

Configuring BGP Filtering by Neighbor

Step 4
Step 5
Step 6
Configuring BGP Filtering by Neighbor
Procedure
Step 1
Step 2
Routing Configuration Guide, Cisco IOS XE Everest 16.6.x (Catalyst 9500 Switches)
132
Command or Action
Example:
Device(config)# set ip next-hop
10.1.1.3
end
Example:
Device(config)# end
show route-map [map-name]
Example:
Device# show route-map
copy running-config startup-config
Example:
Device# copy running-config
startup-config
Command or Action
configure terminal
Example:
Device# configure terminal
router bgp autonomous-system
Example:
Device(config)# router bgp 109
Configuring IP Unicast Routing
Purpose
• In an inbound route map, set the next hop of
matching routes to be the neighbor peering
address, overriding third-party next hops.
• In an outbound route map of a BGP peer, set
the next hop to the peering address of the local
router, disabling the next-hop calculation.
Returns to privileged EXEC mode.
Displays all route maps configured or only the one
specified to verify configuration.
(Optional) Saves your entries in the configuration
file.
Purpose
Enters the global configuration mode.
Enables a BGP routing process, assign it an AS
number, and enter router configuration mode.