Example Of Enabling Ip Routing - Cisco Catalyst 9500 series Configuration Manual

Configuring IP Unicast Routing
Step 2
Step 3
Step 4
Step 5
Step 6

Example of Enabling IP Routing

This example shows how to enable IP routingusing RIP as the routing protocol :
Device# configure terminal
Enter configuration commands, one per line.
Device(config)# ip routing
Device(config-router)# end
What to Do Next
You can now set up parameters for the selected routing protocols as described in these sections:
• RIP
• OSPF,
Command or Action
configure terminal
Example:
Device# configure terminal
ip routing
Example:
Device(config)# ip routing
end
Example:
Device(config)# end
show running-config
Example:
Device# show running-config
copy running-config startup-config
Example:
Device# copy running-config
startup-config
Routing Configuration Guide, Cisco IOS XE Everest 16.6.x (Catalyst 9500 Switches)
Example of Enabling IP Routing
Purpose
Enters the global configuration mode.
Enables IP routing.
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the
configuration file.
End with CNTL/Z.
79