Icmp Router Discovery Protocol (Irdp) - Cisco Catalyst 9500 series Configuration Manual

Configuring IP Unicast Routing
Step 4
Step 5
Step 6

ICMP Router Discovery Protocol (IRDP)

The only required task for IRDP routing on an interface is to enable IRDP processing on that interface. When
enabled, the default parameters apply.
You can optionally change any of these parameters. If you change the maxadvertinterval value, the holdtime
and minadvertinterval values also change, so it is important to first change the maxadvertinterval value,
before manually changing either the holdtime or minadvertinterval values.
Procedure
Step 1
Step 2
Command or Action
end
Example:
Device(config)# end
show ip redirects
Example:
Device# show ip redirects
copy running-config startup-config
Example:
Device# copy running-config
startup-config
Command or Action
enable
Example:
Device> enable
configure terminal
Example:
Device# configure terminal
Routing Configuration Guide, Cisco IOS XE Everest 16.6.x (Catalyst 9500 Switches)
Routing Assistance When IP Routing is Disabled
Purpose
Returns to privileged EXEC mode.
Displays the address of the default gateway
router to verify the setting.
(Optional) Saves your entries in the
configuration file.
Purpose
Enables privileged EXEC mode. Enter your password
if prompted.
Enters the global configuration mode.
69