Configuring Address Resolution Methods - Cisco Catalyst 9500 series Configuration Manual

Configuring IP Unicast Routing
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6

Configuring Address Resolution Methods

You can perform the following tasks to configure address resolution.
Defining a Static ARP Cache
ARP and other address resolution protocols provide dynamic mapping between IP addresses and MAC
addresses. Because most hosts support dynamic address resolution, you usually do not need to specify static
Command or Action
enable
Example:
Device> enable
configure terminal
Example:
Device# configure terminal
no ip classless
Example:
Device(config)#no ip classless
end
Example:
Device(config)# end
show running-config
Example:
Device# show running-config
copy running-config startup-config
Example:
Device# copy running-config
startup-config
Routing Configuration Guide, Cisco IOS XE Everest 16.6.x (Catalyst 9500 Switches)
Configuring Address Resolution Methods
Purpose
Enables privileged EXEC mode. Enter your
password if prompted.
Enters the global configuration mode.
Disables classless routing behavior.
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the
configuration file.
63