Configuring Route Dampening - Cisco Catalyst 9500 series Configuration Manual

Configuring Route Dampening

Step 8
Configuring Route Dampening
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Routing Configuration Guide, Cisco IOS XE Everest 16.6.x (Catalyst 9500 Switches)
144
Command or Action
copy running-config startup-config
Example:
Device# copy running-config
startup-config
Command or Action
configure terminal
Example:
Device# configure terminal
router bgp autonomous-system
Example:
Device(config)# router bgp 100
bgp dampening
Example:
Device(config-router)# bgp dampening
bgp dampening half-life reuse suppress
max-suppress [route-map map]
Example:
Device(config-router)# bgp dampening 30
1500 10000 120
end
Example:
Device(config)# end
Configuring IP Unicast Routing
Purpose
(Optional) Saves your entries in the configuration
file.
Purpose
Enters the global configuration mode.
Enters BGP router configuration mode.
Enables BGP route dampening.
(Optional) Changes the default values of
route dampening factors.
Returns to privileged EXEC mode.