How To Configure Rip - Cisco Catalyst 9500 series Configuration Manual

Configuring IP Unicast Routing

How to Configure RIP

Default RIP Configuration
Table 8: Default RIP Configuration
Feature
Auto summary
Default-information
originate
Default metric
IP RIP authentication
key-chain
IP RIP triggered
IP split horizon
Neighbor
Network
Offset list
Output delay
Timers basic
Validate-update-source
Version
Default Setting
Enabled.
Disabled.
Built-in; automatic metric translations.
No authentication.
Authentication mode: clear text.
Disabled
Varies with media.
None defined.
None specified.
Disabled.
0 milliseconds.
• Update: 30 seconds.
• Invalid: 180 seconds.
• Hold-down: 180 seconds.
• Flush: 240 seconds.
Enabled.
Receives RIP Version 1 and 2 packets; sends Version 1 packets.
Routing Configuration Guide, Cisco IOS XE Everest 16.6.x (Catalyst 9500 Switches)
How to Configure RIP
81