Changing Lsa Group Pacing - Cisco Catalyst 9500 series Configuration Manual

Configuring IP Unicast Routing
Step 12
Step 13
Step 14

Changing LSA Group Pacing

Procedure
Step 1
Step 2
Step 3
Command or Action
end
Example:
Device(config)# end
show ip ospf [process-id [area-id]] database
Example:
Device# show ip ospf database
copy running-config startup-config
Example:
Device# copy running-config
startup-config
Command or Action
configure terminal
Example:
Device# configure terminal
router ospf process-id
Example:
Device(config)# router ospf 25
timers lsa-group-pacing seconds
Example:
Device(config-router)# timers
lsa-group-pacing 15
Routing Configuration Guide, Cisco IOS XE Everest 16.6.x (Catalyst 9500 Switches)
Changing LSA Group Pacing
Purpose
Returns to privileged EXEC mode.
Displays lists of information related to the OSPF
database for a specific router.
(Optional) Saves your entries in the configuration
file.
Purpose
Enters the global configuration mode.
Enables OSPF routing, and enter router
configuration mode.
Changes the group pacing of LSAs.
101