Cisco Catalyst 9500 series Configuration Manual page 30

How to Configure Bidirectional Forwarding Detection
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Step 12
Routing Configuration Guide, Cisco IOS XE Everest 16.6.x (Catalyst 9500 Switches)
20
Command or Action
exit
Example:
Device(config-if)# exit
ip route static bfd interface-type
interface-number ip-address [group
group-name [passive]]
Example:
Device(config)# ip route static bfd
TenGigabitEthernet1/0/1 10.10.10.2 group
group1 passive
ip route [vrf vrf-name] prefix mask {ip-address
| interface-type interface-number [ip-address]}
[dhcp] [distance] [name next-hop-name]
[permanent | track number] [tag tag]
Example:
Device(config)# ip route 10.0.0.0
255.0.0.0
exit
Example:
Device(config)# exit
show ip static route
Example:
Device# show ip static route
show ip static route bfd
Example:
Device# show ip static route bfd
exit
Example:
Device# exit
Configuring Bidirectional Forwarding Detection
Purpose
• IPv6 CEF is disabled globally or locally on
an interface
Exits interface configuration mode and returns
to global configuration mode.
Specifies a static route BFD neighbor.
• The interface-type, interface-number, and
ip-address arguments are required because
BFD support exists only for directly
connected neighbors.
Specifies a static route BFD neighbor.
Exits global configuration mode and returns to
privileged EXEC mode.
(Optional) Displays static route database
information.
(Optional) Displays information about the static
BFD configuration from the configured BFD
groups and nongroup entries.
Exits privileged EXEC mode and returns to user
EXEC mode.