Cisco Catalyst 9500 series Configuration Manual page 135

Configuring IP Unicast Routing
Feature
Neighbor
1
NSF Awareness
Route reflector
Synchronization (BGP and
IGP)
Table map update
Default Setting
• Advertisement interval: 30 seconds for external peers; 5 seconds for
internal peers.
• Change logging: Enabled.
• Conditional advertisement: Disabled.
• Default originate: No default route is sent to the neighbor.
• Description: None.
• Distribute list: None defined.
• External BGP multihop: Only directly connected neighbors are
allowed.
• Filter list: None used.
• Maximum number of prefixes received: No limit.
• Next hop (router as next hop for BGP neighbor): Disabled.
• Password: Disabled.
• Peer group: None defined; no members assigned.
• Prefix list: None specified.
• Remote AS (add entry to neighbor BGP table): No peers defined.
• Private AS number removal: Disabled.
• Route maps: None applied to a peer.
• Send community attributes: None sent to neighbors.
• Shutdown or soft reconfiguration: Not enabled.
• Timers: keepalive: 60 seconds; holdtime: 180 seconds.
• Update source: Best local address.
• Version: BGP Version 4.
• Weight: Routes learned through BGP peer: 0; routes sourced by the
local router: 32768.
2
Disabled . If enabled, allows Layer 3 switches to continue forwarding
packets from a neighboring NSF-capable router during hardware or software
changes.
None configured.
Disabled.
Disabled.
Routing Configuration Guide, Cisco IOS XE Everest 16.6.x (Catalyst 9500 Switches)
Default BGP Configuration
125