Configuring An Msdp Mesh Group - Cisco Catalyst 9500 series Configuration Manual

Configuring an MSDP Mesh Group

Step 5
Step 6
Step 7
Configuring an MSDP Mesh Group
An MSDP mesh group is a group of MSDP speakers that have fully meshed MSDP connectivity among one
another. Any SA messages received from a peer in a mesh group are not forwarded to other peers in the same
mesh group. Thus, you reduce SA message flooding and simplify peer-RPF flooding. Use the ip msdp
mesh-group global configuration command when there are multiple RPs within a domain. It is especially
used to send SA messages across a domain. You can configure multiple mesh groups (with different names)
in a single Device.
Follow these steps to create a mesh group:
Procedure
Step 1
Step 2
Routing Configuration Guide, Cisco IOS XE Everest 16.6.x (Catalyst 9500 Switches)
42
Command or Action
end
Example:
Device(config)# end
show running-config
Example:
Device# show running-config
copy running-config startup-config
Example:
Device# copy running-config
startup-config
Command or Action
enable
Example:
Device> enable
configure terminal
Example:
Device# configure terminal
Purpose
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the configuration file.
Purpose
Enables privileged EXEC mode. Enter your password
if prompted.
Enters the global configuration mode.
Configuring MSDP